Spectra Precision Survey Pro v4.6 Recon-Nomad Reference Manual - Manual (Page 204)

Survey Pro Reference Manual
R-196
The rover receiver will monitor the data link until the base reference
position arrives, then Survey Pro will check the point database for a
matching point. If you are using a remote base, Survey Pro will find a
matching point or prompt you to store a new point. If you are using
the base station you have already set with this data collector, then
this check serves as error detection.
Solve Localization
The Solve Localization screen is used to indicate when a horizontal
and vertical localization adjustment is required, and to guide you
through the steps to collect control points and solve the adjustment.
Collect Control>: opens the Control Points screen, where
you can choose local points to use as GPS control points
and occupy them with the GPS rover.
Solve Localization
: displays information about the
current number of GPS control points, and how many
more are needed to have the minimum number required
to solve the localization.
Solve Localization…: opens the Solve Localization wizard
(Page R-215).
Start Now > : allows you to start surveying now without
localizing. Localization can be performed later, at which
time all data collection points will be updated to the
proper local coordinates.