Spectra Precision Survey Pro v4.6 Recon-Nomad Reference Manual - Manual (Page 230)

Survey Pro Reference Manual
R-222
Vertical Card
The Vertical card shows results of the vertical localization solution.
Status
: displays the status of the current vertical
solution. This will be one of the following:
• Control points solution: is displayed when the
parameters were calculated from the selected
control points.
• Current vertical site: is displayed when there is a
vertical solution and Solve V was not selected on
this pass.
• Unadjusted geoid model: is displayed when there
is a geoid model selected but no vertical
adjustment.
• No vertical site: is displayed when there is no
vertical solution and Solve V was not selected on
this pass.
Slope N
: displays the slope of the inclined plane along the local north
grid axis in parts per million.
Slope E
: displays the slope of the inclined plane along the local east
grid axis in parts per million.
Separation
: displays the separation between the inclined plane and
the local elevation.
Origin N / E
: displays the origin of the inclined plane. This is in local
coordinates, and it will be the local coordinate of the first control
point used in the solution (or your manual input location).
Accept : opens the Adjust with Projection wizard, where the latest
coordinate system adjustment will be applied to your job file points,
and you can review the results. When you accept the results, the
coordinate system is updated in the job, the raw data is written, and
the projection adjustment is applied to job points.