Spectra Precision Survey Pro v4.6 Recon-Nomad Reference Manual - Manual (Page 86)

Survey Pro Reference Manual
R-78
“LOT10” would be connected. If LOT15 were also used as a
description during data collection, any future use of LOT15
would connect to the previous LOT15 entry.
Note: Linework descriptions are case sensitive.
Cmd: lists the current type of line segment (linework) that will be
created after shooting the required points and storing them with the
associated Description. The following linework command options are
selected by repeatedly tapping the appropriate button:
• Line : creates a straight line between the next two points
stored with a description associated with Line.
• P-Crv : creates a curve through the next 3 points stored
with a description associated with P-Crv.
• R-Crv : creates a curve between the next two
points that are stored with a description
associated with R-Crv. After the second R-Crv
point is shot, the prompt shown will open and is
used to define the details of the curve.