Nematron Pointe Controller - Manual (Page 294)

Appendix A: OptiLogic Technical Specifications Pointe Controller User Guide
292
A.18 OL3850 Keypad Terminal
The OL3850 Keypad Terminal has a 2 line x 20 character LCD display, a numeric
keypad w/ up and down arrows, five user-definable pushbuttons, and three
colored indicator bars. The buttons can be configured for either momentary or
alternate-action operation. The button LEDs normally reflect button on/off status.
The momentary buttons can also be configured for LED separation (direct on/off
control). Every button LED and indicator bar can be turned on, off, or flashed.
A.18.1 OL3850 Configuration Options
The OL3850 panel is configured through the Configure I/O menu command in the
PointeControl development framework. (For more information on Configure I/O,
see page 118.) Selecting an OL3850 panel and clicking the I/O button opens the
OL3850 I/O Map dialog window…
Indicators tab
This tab configures the green (Indicator 1), yellow (Indicator 2), and red (Indicator
3) bars on the OL3850 panel.