Nematron Pointe Controller User Manual
Page 292
Appendix A: OptiLogic Technical Specifications
Pointe Controller User Guide
290
NOTE: You can leave any or all Buttons unconfigured, but if you do, those I/O
points will not be available to your project.
Messages tab
This tab controls to two lines of the LCD on the OL3420 panel. The lines on the
panel are numbered 1 and 2, from top to bottom. Each line is mapped to a
separate 20-character String variable.
To configure a Line, click the
to the right and select a String variable from the
pop-up menu. Each variable can be used only once.
Lines can be set and changed independently of each other; text does not wrap
from one line to the next. To display text on the panel, use String commands
(
Flow Chart
or
Ladder Block
) to write the desired text to the associated String
variables.
NOTE: You can leave any or all Lines unconfigured, but if you do, those I/O points
will not be available to your project.
When you have finished configuring the panel, click OK to save your changes and
close the window.