Nematron Pointe Controller User Manual
Page 23
Pointe Controller User Guide
Chapter 1: Introducing the Pointe Controller
21
PART #
DESCRIPTION
OL2208
8-point DC input. 10-30VDC (sourcing or sinking).
OL2211
8-point AC input. 80-132VAC.
OL2252
Counter Input, 2 channels, 0-15 KHz.
OL2258
High Speed Counter. P&D, Quadrature, Up/Down Count. 0-80 KHz (0-160
KHz for Quad). Two high-speed open collector outputs.
OL2304
4-channel analog voltage output, 14-bit. 0-5v, 0-10v, +/-5v, +/-10v
configurable. 12-bit resolution.
OL2408
8-channel analog voltage input, 14-bit. 0-5VDC or 0-10VDC
conbfigurable.
OL2418
8-channel analog current input, 14-bit. 4-20 mA.
OL2602
2-channel RS232 serial.
OptiLogic Operator Panels and Interconnect Cables
OL3406
Pushbutton / Indicator Panel. 4 user-definable pushbuttons, 6 LED
indicators. Comes with OL-CBL-RIB1.
OL3420
Terminal Panel. 2 line x 20 character alphanumeric LCD. LED backlit. 4
user-definable pushbuttons. Comes with OL-CBL-RIB1.
OL3440
Alphanumeric Display panel. 4 line x 20 character LCD. LED backlit.
Comes with OL-CBL-RIB1.
OL3850
Keypad Terminal panel. 2 line x 20 character alphanumeric LCD. LED
backlit. Numeric keypad. Three large LED indicator light bars. 5 user-
definable pushbuttons. Comes with OL-CBL-RIB1.
OL-CBL-RIB1
OL Operator Panel interconnect cable, 1 inch (approximate). Comes with
each operator panel.
OL-CBL-RIB12
OL Operator Panel interconnect cable, 12 inches (approximate).
OL-CBL-RIB36
OL Operator Panel interconnect cable, 36 inches (approximate).
OptiLogic RTUs (remote I/O base units for networked systems)
OL4054
4-slot RTU base — 10BaseT Ethernet interface, 1 RS232 port, operator
panel interface, DIN rail mountable, 8-30VDC power required for
operation.
OL4058
8-slot RTU base — 10BaseT Ethernet interface, 1 RS232 port, operator
panel interface, DIN rail mountable, 8-30VDC power required for
operation.
OL4228
8-slot Modbus RTU base — 10BaseT Ethernet interface, 1 RS232 port,
operator panel interface, DIN rail mountable, 8-30VDC power required
for operation.
Complete technical specifications for all OptiLogic I/O modules and operator
panels listed above can be found in Appendix A, starting on page 231.