Teledyne LeCroy SierraFC M164 User Manual - Manual (Page 42)

Teledyne LeCroy Easy Mode (Pre‐Defined Setups)
42 SierraFC M164 Protocol Analyzer User Manual
Run an Example Analysis Project
To run an example project:
1. Select File > Open.
2. Locate example analysis projects by looking in the Examples folder. Examples are
available for AdvanceCaptr, EasyCaptr, and Samples.
3. In the Samples folder, choose an example *.fcs file and click Open to display the
example project dialog.
Figure 2.8: Open File Dialog
4. Click the Record button to execute the pre‐defined example.