Teledyne LeCroy SierraFC M164 User Manual - Manual (Page 14)

Teledyne LeCroy
14 SierraFC M164 Protocol Analyzer User Manual
Figure 1.5: LEDs on the Right Front Panel
Status and Configuration Display
The Analyzer front LCD display indicates the configuration and status of operations. For
example, during initialization, the LCD panel displays boot status messages.
LCD Display and Button Functions for Configuring the Analyzer
The SierraFC M164 can be configured from the unit itself. Five buttons are provided to
enable you to configure the Analyzer. When you first turn on the Analyzer, after
initialization, the LCD displays SierraFC_M164 Available with two arrows pointing up and
down as shown in the illustration below.
Figure 1.6: LCD Display and Button on the Front Panel
When connected via ethernet or USB, the Up

and Down

buttons display the
following:
 Static or Dynamic IP Address
 SierraFC_ M164 SN
 Connection
 Unit Name
 Set IP Configuration
 IP Mode Dynamic, or
 IP Mode Static
SierraFC_M164
Available
Up Button
Down Button
Left
Button
Right
Button
LCD Display
Center
Button