Teledyne LeCroy SierraFC M164 User Manual - Manual (Page 322)

Teledyne LeCroy Running Scenarios
322 SierraFC M164 Protocol Analyzer User Manual
8. Once the ports are set the Port Assignment window will display ‘Ports are Ready to
Run’. Click the green arrow to run the Scenario (see Figure 4.38 on page 322 ). Click
the black button to stop running the Scenario.
Figure 4.39: Modify_Idle Scenario Running
9. Once the Scenario is complete or stopped the Output panel will display it. The
Output Panel displays the Time, Device Serial Number, and the ports on which the
Session started, completed and/or stopped (see the following screen capture).
Figure 4.40: Output Panel Displaying Session Started and Stopped