Teledyne LeCroy SierraFC M164 User Manual - Manual (Page 141)

SierraFC M164 Protocol Analyzer User Manual 141
Easy Mode (Pre‐Defined Setups) Teledyne LeCroy
VSAN FCAE‐RDMA FCP SCSI Command ‐ Without Target Notification
Double‐click VSAN FCAE RDMA FCP SCSI Command‐Without Target Notification in the
Patterns Library panel to open the Add VSAN FCAE RDMA FCP SCSI Command‐Without
Target Notification dialog.
Figure 2.106: VSAN FCAE RDMA FCP SCSI Command Without Target Notification Dialog
The format can be Binary or Hexadecimal.
If you select Any SCSI Command, the Command Type can only be Any Command. Click
the down arrow next to the CDB dropdown list, scroll the list to choose a CDB Type, and
click OK. The Any option allows specifying any vendor‐specific or other command.
If you select MMC‐6, SBC‐3, SMC‐3, SPC‐4, SSC‐2, OSD‐2, or ADC‐3, click the down arrow
next to the Command Type dropdown list, scroll the list to choose a Command Type, and
click OK.