Teledyne LeCroy SierraFC M164 User Manual - Manual (Page 34)

Teledyne LeCroy Easy Mode (Pre‐Defined Setups)
34 SierraFC M164 Protocol Analyzer User Manual
Figure 2.1: Protocol Analysis Project Dialog
The New Project dialog opens with default settings to capture Everything on the bus and
to Trigger On on Snapshot. (The analyzer captures everything immediately without
triggering on anything in particular).
Analyzer Settings
Buffer Size and Segments
The Analyzer Settings tab has the Recording Buffer pane where you can set Number of
Segments and the Segment Size. (See
“Buffer Size and Segments” on page 172 .)
Trigger Position
You can set the trigger position in the captured buffer as a percentage of the segment
size. Trigger point of 0% means the trigger point will be on the first packet in the buffer.
(See
“Trigger Position” on page 172 .)
What analyzer triggers on
Project Overview Pane
Collapse All Button: hides
details in Project Overview
Expand All Button: shows
details in Project Overview
Capture Memory Settings