Teledyne LeCroy SierraFC M164 User Manual - Manual (Page 302)

Teledyne LeCroy Settings in Advanced Mode
302 SierraFC M164 Protocol Analyzer User Manual
Scenario Properties
To begin the Scenario creation process, you click the New Scenario button in a library
window or on the FC InFusion application toolbar. As the first step in creating a Scenario,
the application prompts you for Scenario name, a short description (optional), and the
direction of traffic to which any traffic changes apply. Changes are, for example, injection
or removal of data or an ordered‐set.
You identify direction of traffic change, or modification, in terms of traffic origin. The
application uses the following conventions:
 From P1/P3: Change is made to traffic coming from Port 1 or Port 3 (for exam‐
ple, CRC error is injected into traffic stream sent from P1/P3 to P2/P4).
 From P2/P4: Modification is made to traffic coming from the Port 2 or Port 4 (for
example, CRC error is injected into traffic stream sent from P2/P4 to P1/P3).
Figure 4.17 on page 303 shows the first prompt in the Scenario creation process.
Figure 4.17: Entering Basic Scenario Information
To copy an Event or Action, right‐click on the Event or Action and select Copy. 
Right‐click Click here to add another event or Click here to add an action and then select
Paste.
To copy a sequence or state, right‐click on the sequence or state and select Copy. 
Right‐click Click here to add another sequence or Click here to add another state and
then select Paste.
You can also cut, delete, and edit a selected Sequence, State, Event, or Action.
When you click the Scenario Name or the Direction For Traffic Changes, the
Scenario Properties dialog box displays (see
Figure 4.18 on page 304 ), allowing you to
enter the Scenario name, a short description, and direction of traffic change.