Configuration, Port status, Statistical reports – Teledyne LeCroy SierraFC M164 User Manual User Manual
Page 31: Infusion, Crosssync control panel
SierraFC M164 Protocol Analyzer User Manual
31
Protocol Analyzer
Teledyne LeCroy
Configuration
For special work, you can use the Configuration menu to configure Port Alias, External Trig
Setting, Software Settings, and Input/Output Signals. (
Port Status
You can display an overview of the active ports by clicking the buttons at the bottom right
of the main window (see
).
Statistical Reports
You can generate statistics for all transports, commands, primitives, addresses, lanes, and
errors (see
“Statistical Report” on page 209
).
InFusion
The Teledyne LeCroy InFusion™ Error Injector and Traffic Modifier is an error injector and
traffic modification tool that allows you to verify real‐world fault handling for SierraFC
systems (see
“FC InFusion” on page 255
).
CrossSync Control Panel
The CrossSync Control Panel allows you to select analyzers for synchronization and
manage the recording process. It supports a wide combination of Teledyne LeCroy’s
flagship analyzers including PCI Express Gen 1, Gen 2 and Gen 3; USB 2.0 and 3.0; Serial
ATA (SATA) 1.5, 3 and 6Gbps; Serial Attached SCSI (SAS) 6Gbps and Fibre Channel 1. 2, 4
and 8Gbps systems.
CrossSync is Teledyne LeCroy’s analyzer synchronization solution that enables time‐
aligned display of protocol traffic from multiple daisy‐chained analyzers showing packet
traffic from multiple high‐speed serial busses. A lightweight software control panel allows
users to select analyzers for synchronization and manage the recording process. Captured
traffic is displayed using the latest analyzer software (in separate windows) with all the
protocol specific search and reporting features.
Captured packets are displayed in separate windows that share a common time scale.
Navigating the traffic in either direction will scroll to the same timestamp in a
synchronized window. When using the CrossSync option, users can access the full
complement of analysis capabilities available within the individual Teledyne LeCroy
software. Search, reporting, and decoding all operate normally (see
This feature is available with the Teledyne LeCroy SierraFC Fibre channel Protocol Suite
application.