Teledyne LeCroy SierraFC M164 User Manual - Manual (Page 23)

SierraFC M164 Protocol Analyzer User Manual 23
Expandability Teledyne LeCroy
Select Device
After you start the software, click on Configuration and select All Connected Devices (see
the following screen capture).
Figure 1.10: Connecting to Device(s)
The following Select Device dialog displays. The colors in the ‘Location’ column mean the
following:
 Red: Firmware and/or BusEngine components need to be updated to the latest
version
 Light Blue: The device is ready to be connected.
 Yellow: The device is locked.
 Green: The software is connected and ready to run
Figure 1.11: Select Device Dialog