Teledyne LeCroy SierraFC M164 User Manual - Manual (Page 257)

SierraFC M164 Protocol Analyzer User Manual 257
Setup IP Teledyne LeCroy
After the update, the device must restart.
Figure 3.82: Info Dialog
Then the update is complete.
Figure 3.83: Device Setup Dialog with OK Device Status
Setup IP
This section describes the connectivity procedure for the SierraFC M164 System.
Connecting the SierraFC M164 to a Host Machine System Over Ethernet
SierraFC M164 Systems are designed to connect to host machines using a network
connection, which allows the user to control the SierraFC M164 System from a local or
remote host machine.
To connect via USB refer to “Connecting Via USB” on page 27 .