Teledyne LeCroy SierraFC M164 User Manual - Manual (Page 104)

Teledyne LeCroy Easy Mode (Pre‐Defined Setups)
104 SierraFC M164 Protocol Analyzer User Manual
VSAN FCP
Add VSAN‐FCP SCSI Command
Double‐click VSAN FCP SCSI Command in the Patterns Library panel to open the VSAN
FCP SCSI Command dialog.
Figure 2.69: VSAN FCP SCSI Command Dialog
The format can be Binary or Hexadecimal.
To select a VSAN FCP SCSI Command Type select from the following options:
 Any SCSI Command
 MMC_6
 SBC_3
 SMC_3
 SPC_4
 SSC_2
 OSD_2
 ADC_3