Micromod RetroPAK: SLC Configuration Manual - Manual (Page 80)

Command Series Migration to MOD 30ML
Function Codes – Gallery Tutorial
The connections for the port are available in the terminals in the back. In the case of an
instrument that is not NEMA4, the RS 232 port is also available in the front at the bottom
of the faceplate.
• Add a MSC block (Modcell serial communications) to the workspace by dragging it from
Algorithms menu. Double-click on it to configure. The properties menu of the MSC block
will display as shown below:
Figure 2 .57.
MSC
Communication
block
• Type a name and description for this block.
• Select RS-232 (built-in) from the drop-down menu in the Type field.
• Leave all other entries in their default values and click on OK to save the configuration of
this block.
2 - 42