Micromod RetroPAK: SLC Configuration Manual - Manual (Page 253)

Function Code 20 – Indicator Station
GENERAL DESCRIPTION
This function displays 3 inputs in one display one at a time.
UTILIZATION
The MOD 30ML/MODCELL compound FC20 uses a display block to display the 3
inputs.
Figure 20 .1.
Function Code 20
EXPLANATION
Up to 3 variables or inputs can be connected to the display block. The display block has 3
inputs configured.
The display shows the display tag on line 1 and the input number on line 2. The value of
the input is shown on line 6. Line 5 has the text “NXT”. By pressing the scroll key The
default display tag that gets shown on line 1 or at the top of the display is IND-100.
The display tag can be changed by typing the desired text in the Display Tag field in the
display block as shown in the next figure:
20 - 1