Micromod RetroPAK: SLC Configuration Manual User Manual
Page 45
Command Series Migration to MOD 30ML
Function Codes – Gallery Tutorial
New Document
• The New dialog box shows the Document tab now. Select the type MOD Function Block
diagram by clicking on it and then type the name PIDLab for the document in the Name
field.
• This document will be created in the project folder \class automatically and will be added
to your Class project by default. See figure above.
4. When you create a new project, a file with the project name and file extension .APRJ will
be created. This file is called project file in the ViZapp installation directory.
The instrument document is basically the controller database or the configuration file. It is
also known as the MOD Function block diagram. This file has an extension .AFBD and is
saved in the project folder. The workspace we created is saved as a file with extension
.AWSP (Class.awsp) and a file with same name and .FEQP extension (Class.feqp) in the
root folder where the project folder is located.
IF you move your workspace and project to a different location/ drive, move the project
folder and the two files for the workspace (.AWSP and .FEQP), maintaining their relative
location.
• Click on OK. This will display the Choose Instrument Version dialog box as shown in
the next figure: This dialog box will display the different instrument ID module versions
(MODCELL and MOD 30ML).
2 - 7