Micromod RetroPAK: SLC Configuration Manual - Manual (Page 237)

Function Code 10 – High Select
GENERAL DESCRIPTION
This function selects and outputs the input with the highest algebraic value.
UTILIZATION
The MOD 30ML/MODCELL compound FC10 used here has an EX function block
(Expression block).
Figure 10 .1.
Function Code 10
The Expression block FC10 has four inputs called S1, S2, S3 and S4. You can connect as
many as 4 inputs into this block.
The result (R) of this EX block is the highest of the 4 inputs..
INPUTS - OUTPUTS
Signal Block Type Description
S1 FC10 Input – S1
Floating Point Connect to the FC10.S1 signal to
the High Selector.
S2 FC10 Input – S2
Floating Point Connect to the FC10.S2 signal to
the High Selector.
S3 FC10 Input – S3
Floating Point Connect to the FC10.S3 signal to
the High Selector.
10 - 1