beautypg.com

Micromod RetroPAK: SLC Configuration Manual User Manual

Page 254

background image

Command Series Migration to MOD 30ML

Function Code 20 – Indicator Station

Figure 20 .2.

Function Code 14
Input
Configuration

Add the Display Tag to the Display Interface Block: During runtime, you can scroll
through the displays in this list by pressing the Tag button on the instrument.

• Close the compound the loop compound to go the top level of the instrument function

block diagram. Open the DIF (Display Interface) block as shown in the figure below:

20 - 2

This manual is related to the following products: