Micromod RetroPAK: SLC Configuration Manual - Manual (Page 251)

Function Code 17 – Divide
GENERAL DESCRIPTION
This function causes one input S1 to be divided by a second input S2 and the quotient to
be multiplied by a constant S3.
The following equation describes the operation of this function:
Output = S3 * ( S1 / S2)
UTILIZATION
The MOD 30ML/MODCELL compound FC17 used here has an EX function block
(Expression block).
The MOD 30ML/MODCELL compound FC17 used here has an EX function block
(Expression block).
Figure 17 .1.
Function Code 11
The EX block has two inputs S1 and S2 that need to be connected to the attributes for the
division and one more input S3 that multiplies the quotient.
EXPLANATION
The scalar input S3 has default value 1. This can be changed in the input configuration.
The compound also allows you to connect external inputs to S3.
See the Input configuration page of the EX block in the next figure.
17 - 1