Micromod RetroPAK: SLC Configuration Manual - Manual (Page 348)

Command Series Migration to MOD 30ML
Function Code 156 – PID Ratio with Remote SP
To change the display tag name for the PID:
Open the display block PID Display and change the Display Tag under the Display tab.
See figure below:
Figure 156rr .2.
Function Code
156
PID Ratio with
Remote SP
Display Block
The display tag name also needs to be entered into the DIF (Display Interface Block) at
the top level of the database. See the section: Procedure for adding the Display Tag to
the Display Interface Block in the chapter Introduction for more information.
156rr - 4