Micromod RetroPAK: SLC Configuration Manual - Manual (Page 50)

Command Series Migration to MOD 30ML
Function Codes – Gallery Tutorial
• Select the Loop Cpd (Loop compound) block from the Algorithms window add it to the
document. Do this by first locating the block in the menu by selecting the All submenu at
the bottom and then by dragging the scroll bar on the right up/down. See the next figure:
Figure 2 .16.
Algorithms menu
• Drag the Loop Cpd block (Loop Compound) from the Algorithms menu on the left frame
to the right frame. Click on the Loop Cpd block with your left mouse button and then
drag it to the instrument document. Click on the mouse button to place the Loop
compound block with the other existing blocks (IF, SE, DIF and ST) on the right frame.
8. Configure a name and description for the Loop Compound: Click once on this block with
your right mouse button. A menu as shown in the next figure will appear.
Figure 2 .17.
Loop Compound
Properties
• Select Properties from the menu. The Algorithm Properties of the Loop Cpd block will be
displayed next as shown in the next figure.
• Type “Control” in the Name field.
2 - 12