Micromod RetroPAK: SLC Configuration Manual - Manual (Page 265)

Command Series Migration to MOD 30ML
Function Code 28 – Analog/Digital Output
Instrument Number – This is the ICN address of the instrument where the data is sent to.
This is the equivalent of S1 in the Bailey Function code 28.
OC Number – This is the occurrence number of the OC block (FC 25 or 41) configured
in the receiving instrument. This is the equivalent of S2 in the Bailey Function code 28.
Port Number – This is the port number of the ICN communication channel in the sending
instrument.
Figure 28 .3.
OC Block
INPUTS - OUTPUTS
Signal Block Type Description
S1 OC Input – S1
Floating Point /
Other data type Connect to the OC.S1 signal of the
compound. Output to be sent over
the ICN.
28 - 3