Micromod Micro-DCI: 53SL5100A Single Loop Controller - Manual (Page 69)

Single Loop Process Controller Instruction Manual
Single Loop (PID) Controller 61
5.3.1 Abbreviated Configuration Tables
Table 5-1 through Table 5-8 are provided as a quick reference source for the contiguration datapoints.
These tables do not have the definition column; therefore, for the initial instrument configuration, Section 4
should be referenced until each datapoint functionality can be recognized by its title. These tables are pro-
vided because even though the functionality of the datapoints can eventually be recognized by title, the
specific datapoint locations can not always be remembered.
Table 5-2. Analog lnput (ANI) Module
Title Symbol
ANI0
Datapoint
ANI1
Datapoint
Default
Analog Input
(Display Only) ANI H000 H001 0
Engineering
Span SPAN C256 C257 100
Engineering
Zero ZERO C276 C277 0
Digital Filter
Index DFILT B269 B270 3
0-5 V lnput NOBIAS L416 L417 0
Square Root
Signal SQRT L440 L441 0
Calibrate Zero CIZ B263 B264
Calibrate Span CIS C296 C297
Tag Name AITAG A224 A225 ANI0
ANI1
Engineering
Units AIEU A298 A299 Percent
Table 5-3. Analog Output (ANO) Module
Title Symbol
ANO0
Datapoint
Default
Analog Output
(Display Only) ANO C000 0
0 - 210 mA
Output OZBASE L472 0
Calibrate Zero COZ B267
Calibrate Span COS C300
Tag Name AOTAG A244 ANO0