Micromod Micro-DCI: 53SL5100A Single Loop Controller - Manual (Page 142)

Single Loop Process Controller Instruction Manual
134 Database
Table C-2. Database
Title Symbol Datapoint Default Attribute
Control Tag
Name CTAG A000 CON-0 It is an assignable 10 character name that appears with
the control strategy (CS1-4) displays.
Engineering
Units CEU A001 PERCENT The default is PERCENT, but is assignable as units of
measure the Process Variable represents.
System
Module Tag
Name TAG A008 SL5100 It is an assignable 10 character name for the system
module.
Parameter
Title PTAG A014 CON-0
TUNE
It is an assignable 10 character name for the parameter
display.
Parameter
Point 1
Name PNA A015 PROP.
BAND
It is an assignable 10 character name for the Point 1
Designator of the parameter display.
Parameter
Point 2
Name PNB A016 RESET It is an assignable 10 character name for the Point 2
Designator of the parameter display.
Parameter
Point 3
Name PNC A017 RATE It is an assignable 10 character name for the Point 3
Designator of the parameter display.
ANI0 Tag
Name AITAG A224 ANI0 It is an assignable 10 character name for analog input 0.
ANI1 Tag
Name AITAG A225 ANI1 It is an assignable 10 character name for analog input 1.
ANO0 Tag
Name AOTAG A244 ANO0 It is an assignable 10 character name for analog output
0.
CCI Tag
Name CITAG A262 CCI0 It is an assignable 10 character name for the contact
control input.
CCO Tag
Name COTAG A280 CCO0 It is an assignable 10 character name for the contact
control output.
ANI0
Engineering
Units AIEU A298 PERCENT It is assignable for units of meature ANI0 represents
(e.g., GPM for gallons/minute).
ANI1
Engineering
Units
AIEU A299 PERCENT
It is assignable for units of meature ANI1 represents
(e.g., GPM for gallons/minute).