Micromod Micro-DCI: 53SL5100A Single Loop Controller - Manual (Page 144)

Single Loop Process Controller Instruction Manual
136 Database
ANI1
Calibrate
Zero CIZ B264 This is the calibration zero adjustment. This parameter is
factory set and should not need adjustment under
normal operation. See
Section 12.3 for adjustment.
ANO0
Calibrate
Zero COZ B267 This is the calibration zero adjustment. This parameter is
factory set and should not need adjustment under
normal operation. See
Section 12.3 for adjustment.
ANI0 Digital
Filter Index DFILT B269 3
This controls a first order filter that is applied to the input
signal. The time constant is entered as an index value as
follows:
0 - No Smoothing (no effect)
1 - 0.05 s
2 - 0.1 s
3 - 0.3 s
4 - 0.7 s
5 - 1.5 s 6 - 3.1 s
7 - 6.3 s
8 - 12.7 s
9 - 25.5 s
10 - 51.1 s 11 - 102 s
12 - 205 s
13 - 410 s
14 - 819 s
15 - 1638 s
ANI1 Digital
Filter Index DFILT B270 3 This controls a first order filter that is applied to the input
signal. The time constant is entered as an index value as
follows:
0 - No Smoothing (no effect)
1 - 0.05 s
2 - 0.1 s
3 - 0.3 s
4 - 0.7 s
5 - 1.5 s 6 - 3.1 s
7 - 6.3 s
8 - 12.7 s
9 - 25.5 s
10 - 51.1 s 11 - 102 s
12 - 205 s
13 - 410 s
14 - 819 s
15 - 1638 s
Table C-2. Database (Continued)
Title Symbol Datapoint Default Attribute