B&B Electronics EIRM-EXTEND-8 - Manual User Manual
Page 82
76
Manual Documentation Number: EIRM-EXTEND-8-1411m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
2. compliant VLAN pruning and dynamic VLAN creation on
IEEE802.1Q trunk ports.
3. Update Setting: Select “Update Setting” button when you finished
GVRP Global Setting.
Per port setting (include LAG):
1. GVRP: Select “GVRP” drop-down menu from “GVRP” drop-down list
to choose “Enable” or “Disable” to enable or disable GVRP for the
port.
2. GVRP applicant: Select “GVRP applicant” drop-down menu from
“GVRP applicant” drop-down list to choose “Active” or “Normal” to
the port. Ports in the GVRP active applicant state send GVRP VLAN
declarations when they are in the STP (Spanning Tree Protocol)
blocking state, which prevents the STP bridge protocol data units
(BPDUs) from being pruned from the other port. Ports in the GVRP
normal applicant state do not declare GVRP VLANs when in the STP
blocking state.
3. GVRP registration: Select “GVRP registration” drop-down menu from
“GVRP registration” drop-down list to choose “Enable” or “Disable”
to enable or disable GVRP registration to the port. Configuring an
IEEE802.1Q trunk port in registration mode allows dynamic creation
(if dynamic VLAN creation is enabled), registration, and deregistration
of VLANs on the trunk port.
4. Update Setting: Select “Update Setting” button when you finished Per
port setting.