B&B Electronics EIRM-EXTEND-8 - Manual - Manual (Page 18)

12
Manual Documentation Number: EIRM-EXTEND-8-1411m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Cabling
Step 1: Always ensure the power is off before beginning installation.
Step 2: Prepare cables with corresponding connectors for each port.
Step 3: Consult Cable Specifications Table on previous page for cabling
requirements based on connectors and speed.
Step 4: Connect one end of the cable to the Ethernet Extender Switch and
the other end to a desired device.
Step 5: Once the connections between two ends devices are made
successfully, turn on the power and confirm LED status.
Ethernet Extender Switch Management
This chapter reviews configuration options used by the Ethernet Extender
Switch. It describes the types of management applications, the
communication, and the management protocols that deliver data between
your management device (workstation or personal computer) and the
system. It also contains information about port connection options.
This chapter covers the following topics:
• Management Access Overview
• Key Concepts
• Key Guidelines for Implementation
• Web Management Access
• Administration Console Access
• SNMP Access
• Standards, Protocols, and Related Reading
Management Access Overview
The Ethernet Extender Switch gives you the flexibility to access and
manage the Ethernet Extender Switch using any or all of the following
methods.
The web browser interface and administration console Command Line
Interface (CLI) support are embedded in the Ethernet Extender Switch
software and are available for immediate use.