B&B Electronics EIRM-EXTEND-8 - Manual - Manual (Page 111)

Manual Documentation Number: EIRM-EXTEND-8-1411m 105
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Port
Configuration, Port Status, Rate Control, RMON Statistics, Per Port Vlan
Activities, Port Security
Configuration, Port Status, Rate Control, RMON Statistics, Per Port Vlan
Activities, Port Security
Configuration
Admin Setting:
1. Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
fe1 means port 1.
The switch_a(config-if)# prompt will show on the screen.
switch_a(config)#interface fe1
switch_a(config-if)#
2. Usage:
Use the shutdown command to shut down the selected interface.
Use the no shutdown to disable this function.
3. Command Syntax:
(no) shutdown
4. Example:
The following example shows the use of the shutdown command to shut
down the interface fe1 (port 1):
switch_a(config)#interface fe1
switch_a(config-if)#shutdown
switch_a(config-if)#
Duplex:
1. Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
fe1 means port 1.
The switch_a(config-if)# prompt will show on the screen.
switch_a(config)#interface fe1
switch_a(config-if)#
2. Usage: