B&B Electronics EIRM-EXTEND-8 - Manual - Manual (Page 103)

Manual Documentation Number: EIRM-EXTEND-8-1411m 97
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
ARP Table
1. Command Mode: Privileged Exec mode
Logon to Privileged Exec Mode (Enable Mode).
The switch_a# prompt will show on the screen.
switch_a(config)#
2. Usage:
Use show arp-table command to view ARP Table.
3. Command Syntax:
show arp-table
4. Example:
The following example shows the ARP Table of switch:
Route Table
1. Command Mode: Privileged Exec mode
Logon to Privileged Exec Mode (Enable Mode).
The switch_a# prompt will show on the screen.
switch_a(config)#
2. Usage:
Use show route-table command to view Route Table.
3. Command Syntax:
show route-table
4. Example:
The following example shows the Route Table of switch:
switch_a#show route-table
Save Configuration
Load config from TFTP server:
1. Command Mode: Privileged Exec mode
Logon to Privileged Exec Mode (Enable Mode).
The switch_a# prompt will show on the screen.
switch_a#
2. Usage:
Use install image command to load configuration file from tftp server to
Ethernet Extender Switch.