B&B Electronics EIRM-EXTEND-8 - Manual - Manual (Page 155)

Manual Documentation Number: EIRM-EXTEND-8-1411m 149
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Add a user using snmp v3 with read-only or read-write access mode and
with MD5 or SHA authentication. Use the no form of the command to
delete this user.
3. Command Syntax:
(no) snmp-server v3-user USERNAME (ro｜rw) auth (md5｜sha)
AUTH_PASSWORD
USERNAME Specify a user name.
ro read-only access mode
rw read-write access mode
md5 authentication method
sha authentication method
AUTH_PASSWORD authentication password
4. Example:
The following example adds a user (myuser) using snmp v3 with read-
write access mode and MD5 authentication (mypassword):
switch_a(config)#snmp-server v3-user myuser rw auth md5
mypassword
switch_a(config)#
SNMPv3 Priv Auth-MD5, SNMPv3 Priv Auth-SHA:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
Add a user using snmp v3 with read-only or read-write access mode, MD5
or SHA authentication, and privacy. Use the no form of the command to
delete this user.
3. Command Syntax:
(no) snmp-server v3-user USERNAME (ro｜rw) priv auth (md5｜sha)
AUTH_PASSWORD des PRIV_PASS_PHRASE
USERNAME Specify a user name.
ro read-only access mode
rw read-write access mode
md5 authentication method
sha authentication method
AUTH_PASSWORD authentication password
PRIV_PASS_PHRASE encryption pass phrase