2 scanning documents of different types and sizes, Documents with different widths, Scanning documents of different types and sizes – Fujitsu Ricoh Fujitsu fi-7280 Color Duplex Document Scanner User Manual
Page 87
Chapter 5 Various Ways to Scan
87
Documents with Different Widths
1
Align the top of the documents.
2
Place the documents at the center of the ADF paper chute
(feeder), and adjust the side guides to the widest
document in the batch.
For details, refer to
"Chapter 2 How to Load Documents" (page 41)
5.2 Scanning Documents of Different Types and Sizes
ATTENTION
When you scan a mixed batch with different widths, some of the smaller
documents may be skewed or not fed into the ADF. In that case,
separate the documents by their widths, and scan them in different
batches.
HINT
For more details about scanning a mixed batch of documents, refer to
"Conditions for Mixed Batch Scanning" (page 51).
ATTENTION
Make sure that all documents are placed underneath the pick
roller. Otherwise, some documents may be skewed or not fed into
the ADF.
Pick roller's width
Good
Pick roller's width
Bad