Fujitsu Ricoh Fujitsu fi-7280 Color Duplex Document Scanner - Manual (Page 73)

Chapter 4 How to Use the Operator Panel
Appendix
Glossary
Introduction
Index
Contents
TOP
73
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Configuring the
Scan Settings
■ Operational settings
1
Press the [Power] button on the operator panel.
The [Ready] screen is displayed on the LCD.
2
Press the [Menu] button.
The [Settings Menu] screen is displayed on the LCD.
3
Press the [ ] or [ ] button and select a setting item, then
press the [Scan/Enter] button to confirm.
For more details about the setting items, refer to "Items Configurable
in the Settings Menu" (page 76) .
The selected item is displayed on the LCD.
4
Press the [ ] or [ ] button and select a parameter, then
press the [Scan/Enter] button to confirm.
For more details about the setting parameters, refer to "Items
Configurable in the Settings Menu" (page 76) .
If the [Settings Menu] screen is displayed on the LCD, it indicates
that the setup has been completed.
If the LCD displays a setting item, repeat step
4 until it shows the
[Settings Menu] screen.
Menu
Scan/Enter
Check
Power
Stop/Clear
2 [Menu] button
3 [ ]/[ ] button
[Scan/Enter] button
4 [ ]/[ ] button
[Scan/Enter] button
1 [Power] button
HINT
z "*" is displayed for the factory default setting.
z When you select an item in the screen, the parameter currently
selected is highlighted.