*1: The minimum scanning area only applies to using the ADF. There is no limitation when using the flatbed.
*2: Long page scanning supports documents with a length of up to 5,588 mm (220 in.) when the scanning resolution is set to 200 dpi or less.
*3: When scanning plastic cards from the ADF, you can load up to 3 cards in the ADF paper chute (feeder).
*4: Up to 1.25 mm is supported for scanning at 300 dpi or less (80 ppm) in landscape when using the fi-7180/fi-7280.

This setting can be changed in the Software Operation Panel to scan plastic cards with a thickness up to 1.4 mm.
For details, refer to

" Scanning Thick Plastic Cards [Feed Mode] (fi-7180/fi-7280)" (page 194).

*5: The paper weight only applies to using the ADF. There is no limitation when using the flatbed.
*6: Note that this is the hardware limitation, and the software's processing time such as data transfer time is added to the actual time of scanning.
*7: The capacity varies depending on the paper weight.

For details, refer to

"2.3 Documents for Scanning (ADF)" (page 45).

*8: Connection with USB 3.0/2.0 requires the USB port and the hub to support USB 3.0/2.0. Also note that the scanning speed slows down when using USB

1.1.

Output
resolution

Binary (black & white)

50 to 600 dpi, 1200 dpi

50 to 600 dpi: configurable in
1 dpi increments
1200 dpi: created by scanner
driver

Grayscale

Color

Grayscale level

8-bit for each color

16-bit during internal
processing

Interface

USB3.0/2.0/1.1 (*8)

B Type

LCD

Display: FSTN (black & white)
Displayed dots: 110 × 65
Displayed lines: 5 × 16 (row × column)

Item

Specification

Notes

fi-7160

fi-7260

fi-7180

fi-7280