9 basic flow of scanning operation, Basic flow of scanning operation, Appendix – Fujitsu Ricoh Fujitsu fi-7280 Color Duplex Document Scanner User Manual
Page 37: Glossary introduction index contents top
Chapter 1 Scanner Overview
37
This section explains about the basic flow of performing a
scan.
In order to perform a scan, you need a scanner driver and an
image scanning application that supports the scanner driver.
The following scanner drivers and image scanning
applications are bundled with the scanner:
z
Scanner driver
- PaperStream IP (TWAIN) driver
Conforms to the TWAIN standard. Used when you operate the
scanner using TWAIN-compliant 32-bit applications.
- PaperStream IP (TWAIN x64) driver
Conforms to the TWAIN standard. Used when you operate the
scanner using TWAIN-compliant 64-bit applications.
- PaperStream IP (ISIS) driver
Conforms to the ISIS standard. Used when you operate the
scanner using ISIS-compliant applications.
z
Image Scanning Application
- PaperStream Capture
Supports the PaperStream IP (TWAIN) driver and the
PaperStream IP (ISIS) driver
- ScanSnap Manager for fi Series
Supports the PaperStream IP (TWAIN) driver.
Scanning procedures and operations slightly vary depending
on the image scanning application.
For details, refer to the image scanning application manual.
The following describes the normal procedure for scanning.
1
Turn on the scanner.
For details, refer to
"1.3 Turning the Power ON/OFF" (page 25)
.
2
Load a document face-down in the ADF paper chute
(feeder).
For details, refer to
"Chapter 2 How to Load Documents" (page 41)
.
1.9 Basic Flow of Scanning Operation
HINT
z
For details about the scanner driver, refer to the following:
-
"Chapter 3 Configuring the Scan Settings" (page 55)
- PaperStream IP driver Help
z
For details about the image scanning application, refer to the
following:
-
"1.10 Image Scanning Application" (page 39)
- PaperStream Capture Help
- ScanSnap Manager for fi Series Help