beautypg.com

Appendix glossary introduction index contents top – Fujitsu Ricoh Fujitsu fi-7280 Color Duplex Document Scanner User Manual

Page 80

background image

Chapter 4 How to Use the Operator Panel

Appendix

Glossary

Introduction

Index

Contents

TOP

80

How to Load
Documents

How to Use the
Operator Panel

Various Ways to
Scan

Daily Care

Troubleshooting

Operational
Settings

Replacing the
Consumables

Scanner
Overview

Configuring the
Scan Settings

13: Paper
Protection

Select a paper protection detection method.
This function can be set to reduce the risk of having
the documents damaged by detecting anomalies
upon feeding the documents and stopping the scan
when:

z

The scanner detects a document that is
unusually warped when a feeding error occurs.

z

The scanner detects paper jam noise

z

The scanner either detects a document that is
usually warped when a feeding error occurs or
detects paper jam noise

Specify the sensitivity level to detect anomalies
upon feeding the documents when paper protection
is used.
Documents are deformed (e.g. warped, bent,
creased) or paper jam noise is made when
documents are not being fed by the rollers properly.
To detect such symptoms and stop the scan, select
[1: Low] to only detect documents that are highly
deformed or loud paper jam noise. To detect
documents that are slightly deformed or small paper
jam noise, select [3: High].
You can also configure the paper protection
detection method from the scanner driver or the
Software Operation Panel. When the operation
panel setting is prioritized, the operator panel
setting is prioritized over the Software Operation
Panel setting. Note that even if the operation panel
setting is prioritized, the scanner driver setting has
the highest priority.
You can also configure the sensitivity level to detect
warped documents and paper jam noise from the
Software Operation Panel. When the operation
panel setting is prioritized, the operator panel
setting is prioritized over the Software Operation
Panel setting.

1: Disable
2: Feeding accuracy
3: Feeding noise
4: Feeding accuracy and noise

Sensitivity for feeding accuracy
1: Low
2: Normal
3: High

Sensitivity for feeding noise
1: Low
2: Normal
3: High

2: Feeding
accuracy

Sensitivity
for feeding
accuracy:
2: Normal

Sensitivity
for feeding
noise:
2: Normal

Item

Description

Parameter (*1)/Value

Factory

Default (*2)

-: No settings/values