Appendix glossary introduction index contents top – Fujitsu Ricoh Fujitsu fi-7280 Color Duplex Document Scanner User Manual
Page 175

Chapter 9 Operational Settings
175
Number of paper feeding retries
Configure this setting to change the number of
feeding retries when a pick error occurs.
This setting can also be configured in the
operator panel.
1 to 12 times
3 times
Cleaning Cycle
Specify the scanner cleaning cycle.
Select whether or not to display the cleaning
instruction message from the scanner driver.
1,000 to 255,000 sheets
(in increments of 1,000)
Show cleaning instructions:
Selected/Not selected
5,000 sheets
Not selected
Life Counter Alarm Setting
Specify the replacement cycle for the
consumables.
Pick Rollers / Brake Rollers:
10,000 to 2,550,000 sheets
(in increments of 10,000)
Pick Rollers:
200,000 sheets
Brake Rollers:
200,000 sheets
Vertical Streak Detection
Select whether to enable or disable vertical
streak detection.
Enable to detect vertical streaks (dirt on the
glass) when you perform scanning with the
ADF.
This setting can also be configured in the
operator panel.
Enable / Disable
Disable
Vertical Streak Sensitivity
Specify the sensitivity level to detect vertical
streaks (dirt on the glass) when vertical streak
detection is enabled.
This setting can also be configured in the
operator panel.
Low / Normal / High
Normal
Pick Speed
When you experience frequent multifeeds and
paper jams, the symptom may be improved by
slowing down the speed in which documents
are picked (fed).
This setting can also be configured in the
operator panel.
Normal / Slow
Normal
AutoCrop Boundary
Specify whether or not to optimize (round up/
down) the fractional part of the scanned image
data.
Optimize / Round Down
Optimize
Item
Description
Parameter/Value
Factory Default