Appendix glossary introduction index contents top – Fujitsu Ricoh Fujitsu fi-7280 Color Duplex Document Scanner User Manual
Page 176
Chapter 9 Operational Settings
176
Manual-feed timeout
Select whether to disable or enable manual
feeding.
Disable / Enable
Disable
Paper-out detection time: Specify the waiting
time to cancel manual feeding.
This setting can also be configured in the
operator panel.
5, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 110
(seconds)
10 seconds
Power SW Control
Specify the method by which the scanner is
powered on/off.
Enable power switch / Disable power switch /
Enable USB power feeding
Enable power
switch
Paper Protection
Select a paper protection detection method.
This function can be set to reduce the risk of
having the documents damaged by detecting
anomalies upon feeding the documents and
stopping the scan when:
z
The scanner detects a document that is
unusually warped when a feeding error
occurs.
z
The scanner detects paper jam noise
z
The scanner either detects a document that
is usually warped when a feeding error
occurs or detects paper jam noise
This setting can also be configured in the
scanner driver or the operator panel. When the
operation panel setting is prioritized, the
operator panel setting is prioritized over the
Software Operation Panel setting. Note that
even if the operation panel setting is prioritized,
the scanner driver setting has the highest
priority.
Disable/Feeding Accuracy/Feeding Noise/
Feeding Accuracy & Noise
Feeding
Accuracy
Paper Protection Sensitivity
Specify the sensitivity level to detect anomalies
upon feeding the documents when paper
protection is used.
This setting can also be configured in the
operator panel. When the operation panel
setting is prioritized, the operator panel setting
is prioritized over the Software Operation Panel
setting.
Detect: Feeding Accuracy/Feeding Noise
Low/Normal/High
Normal
Item
Description
Parameter/Value
Factory Default