Appendix glossary introduction index contents top – Fujitsu Ricoh Fujitsu fi-7280 Color Duplex Document Scanner User Manual
Page 198
Chapter 9 Operational Settings
198
Example 1:
Position: Middle
Selected range = Enable, Start = 50 mm, End = 200 mm
Multifeeds are detected only within the area of light blue.
End
(Middle)
Displays the end position of the detection HINT z When both [Start] and [End] are set to "0", multifeed detection is z To disable multifeed detection for the whole document, select z If you set a value larger than the document length for the start z To detect multifeeds, the detection range must be at least 5 mm z You can also set the start and the end positions by the following displayed image. Range Description 35 50 200 Unit: mm F eed d ire ctio n
by the length from the leading edge of the
document.
Range: 0 to 510 mm, in 2 mm increments,
Start
performed for the whole area regardless of whether it is
enabled or disabled.
[Disable] and set the start position to "0" and the end position to
equal the document length or longer.
position, selecting [Disable] detects the whole length of the
document and selecting [Enable] disables the multifeed
detection.
in length.
Configure the setting so that the value of the end position minus
the start position is 6 mm or more.
methods:
- Draw an area with the mouse on the displayed image.
- Drag the handles for [Start] and [End] positions on the