beautypg.com

A.4 scanner options, Scanner options, Appendix glossary introduction index contents – Fujitsu Ricoh Fujitsu fi-7280 Color Duplex Document Scanner User Manual

Page 214

background image

Appendix

Appendix

Glossary

Introduction

Index

Contents

214

How to Load
Documents

Configuring the
Scan Settings

How to Use the
Operator Panel

Various Ways to
Scan

Daily Care

Troubleshooting

Operational
Settings

Replacing the
Consumables

Scanner
Overview

TOP

For details about purchasing the scanner options and more information, contact your FUJITSU scanner dealer or an authorized
FUJITSU scanner service provider.

A.4 Scanner Options

Name

Model

Supported

model

Description

Imprinter

PA03670-
D201

fi-7160
fi-7180

An option imprinter that can print text (e.g. alphabets, numbers) on the back of the
document after scanning.
It can be used to organize your documents by printing a name, date or serial number on
the scanned document.
For details, refer to the fi-718PR Imprinter Operator's Guide.

Black Document Pad

PA03670-
D801

fi-7260
fi-7280

An option that enables scanning in black background on the flatbed.
It is available as a document cover with a black document pad, and can be replaced with
the standard document cover that has a white document pad.
It can be used to automatically correct skewed images or accurately detect the size of
the scanned document when scanning with the flatbed.

ScanSnap Carrier Sheets

PA03360-
0013

fi-7160
fi-7260
fi-7180
fi-7280

Use this option to scan documents larger than A4/Letter size, as well as non-standard
size documents such as photographs and clippings.
Using the Carrier Sheet allows you to scan documents that are larger than A4/Letter size
such as A3 and B4, scan documents that can be easily damaged such as photographs,
and scan documents that are difficult to load directly such as newspaper clippings.
When the Carrier Sheet is too damaged or worn out to be used for scanning, it can be
purchased separately (5 sheets per set).
The Carrier Sheet should be replaced approximately every 500 scans.
However, replace it if damage or dirt is noticeable.