beautypg.com

1 operator panel, Operator panel, Appendix glossary introduction index contents top – Fujitsu Ricoh Fujitsu fi-7280 Color Duplex Document Scanner User Manual

Page 62

background image

Chapter 4 How to Use the Operator Panel

Appendix

Glossary

Introduction

Index

Contents

TOP

62

How to Load
Documents

How to Use the
Operator Panel

Various Ways to
Scan

Daily Care

Troubleshooting

Operational
Settings

Replacing the
Consumables

Scanner
Overview

Configuring the
Scan Settings

The operator panel consists of an LCD, buttons and LED.
Names and Functions

4.1 Operator Panel

Menu

Scan/Enter

Check

Power

Stop/Clear

LED indicator

Lights in orange when an error occurs.
Flashes when the ADF is open or consumables reach the end of their life cycle.

LCD

Indicates the status of the scanner.
Switches off when the scanner enters power saving mode.

[Stop/Clear] button

Stops the scan immediately.
Cancels the selected item and returns to the previous screen. Clears the displayed
error indication.
Resets the page counter when pressed down for more than three seconds.
Stops the scan when pressed while scanning in manual feed mode.

[Scan/Enter] button (*1)

Launches the linked application software.
Confirms the selected item.
Pauses the scan.(*2) Resumes the scan.
Ejects the document when a multifeed occurs.

[Power] button

Turns the power on/off.
Lights in green when the scanner is turned on.

[ ]/[ ] button

Switches the number (No.00 to No.09/SOP) for the application that is launched by
pressing the [Scan/Enter] button in the [Ready] screen.
Switches the selected item.

*1: For details about using the [Scan/Enter] button, refer to the scanner driver's Help or

"Using a Button on the Scanner to Start Scanning" (page 100)

.

*2: When using the PaperStream IP (TWAIN) driver, pressing the [Scan/Enter] button during scanning will pause the scan after that document is

scanned.
When using the PaperStream IP (ISIS) driver/ScanSnap Manager for fi Series, pressing the [Scan/Enter] button during scanning will cancel the scan
after that document is scanned.

[Menu] button

Configures various types of scanning operations.
Determines whether or not to memorize the pattern if pressed
when a multifeed occurs.
Determines whether to enable or disable paper protection if
pressed when a scanning operation is stopped due to paper
protection.