screen, [Function
Selection] is displayed.
By using Function
Selection, you can
configure the application
you want to launch when
you press the [Scan/Enter]
button in the [Ready]
screen.
For details about the
Function Selection screen,
refer to

"4.3 Function

Selection" (page 83)

Indicates that a temporary
error occurred during
scanning.
Error codes beginning with
the letter "J" or "U" are
displayed.
For more details about the
errors, refer to

"Temporary

Errors" (page 131)

You can clear the error
display by pressing the
[Stop/Clear] button. Note
that if the error is "Paper
jam", the message
disappears after a certain
amount of time elapses
with no documents
([Ready] status) in the
scanner.

Display

Description

Title

Items

Error code

Error
Message

Indicates that a device
error (alarm) occurred
during initialization or
scanning.
Error codes beginning with
the letter "E", "F", "C", "H",
"A" or "L" are displayed.
For more details about the
errors, refer to

"Device

Errors" (page 133)

When this alarm occurs,
turn the power off then
back on. If the problem still
persists, contact your
FUJITSU scanner dealer or
an authorized FUJITSU
scanner service provider.

When the scanner has not
been in operation for the
set sleep interval, it enters
power saving mode.
Press any button on the
operator panel to return to
the previous screen.

Display

Description

Error code

Error
Message