Appendix glossary introduction index contents top – Fujitsu Ricoh Fujitsu fi-7280 Color Duplex Document Scanner User Manual
Page 78
Chapter 4 How to Use the Operator Panel
78
6: LCD Contrast
Specify the contrast for the LCD on the operator
panel.
Weak Strong
■□□□□
■■□□□
■■■□□
■■■■□
■■■■■
■■■□□
7: Check LED Blink
Speed
Specify the flash interval for
and LED
indicator if
is flashing on the LCD.
0.5, 1.0, 1.5, 2.0, 2.5 (seconds)
2.0
8: LCD Scroll Speed
Specify the speed in which the display is
horizontally scrolled.
The displayed item is scrolled horizontally when the
text does not fit in the LCD.
1: Fast
2: Normal
3: Slow
4: OFF
2: Normal
9: Doc Counting
Mode
You can count the number of scanned documents
in Doc Counting Mode.
-
-
10: iMFF Setting
When there is a paper of the same size attached to
a designated location on the page, configure the
scanner to memorize the location of the attachment
and not detect multifeeds for that location.
Note that you need to specify [Check Overlapping
(Ultrasonic)] in either the scanner driver or the
multifeed detection setting in
Multifeed Detection Method [Multifeed]" (page 195)
beforehand.
By selecting [4: Clear pattern], you can clear the
overlapping patterns (length, location) that were
previously memorized in Auto mode.
This setting can also be configured from the
Software Operation Panel.
1: Manual mode
2: Auto mode 1
3: Auto mode 2
4: Clear pattern
1: Manual
mode
Item
Description
Parameter (*1)/Value
Factory
Default (*2)
-: No settings/values