When an error occurs, the LED indicator lights in orange. For
temporary errors, the LCD displays an error code beginning
with the letter "J" or "U. For device errors, an error code
beginning with the letter "E", "F", "C", "H", "A" or "L" is
displayed. Temporary errors can be recovered by the operator,
whereas device errors require a service engineer to perform
recovery. You can clear the error display by pressing the [Stop/
Clear] button. Note that a paper jam message disappears after
a certain period of time elapses if there are no documents
([Ready] status) in the scanner.

If the Error Recovery Guide is installed in the computer, the
Error Recovery Guide window appears when the Windows
operating system is started up. When an error or a malfunction
occurs, the Error Recovery Guide window displays related
information such as the name of the error and the error code
(number).
Write down the information shown in the dialog box and click
the [More Info] button to check for troubleshooting methods.

8.2 Error Indications on Operator Panel

Scan/Enter

Check

Power

Stop/Clear

[Stop/Clear] button

LCD

LED indicator

HINT

The Error Recovery Guide is included in the Setup DVD-ROM.For
details about installation, refer to "Installing the Software" in Getting
Started.