Appendix glossary introduction index contents top – Fujitsu Ricoh Fujitsu fi-7280 Color Duplex Document Scanner User Manual
Page 193
Chapter 9 Operational Settings
193
3
Select a paper protection detection method which you
want to change the sensitivity level for.
Feeding Accuracy :Select this to detect a document that is
unusually warped when a feeding error occurs.
This is available when you have selected
[Feeding Accuracy] or [Feeding Accuracy &
Noise] for the paper protection detection
method.
Feeding Noise
:Select this to detect paper jam noise.
This is available when you have selected
[Feeding Noise] or [Feeding Accuracy & Noise]
for the paper protection detection method.
4
Specify the sensitivity level.
Low: Decreases the sensitivity level to detect warped documents or
paper jam noise.
Normal: Monitors warped documents or paper jam noise in normal
sensitivity.
Keep this setting for normal use.
High: Increases the sensitivity level to detect warped documents or
paper jam noise.
HINT
z
To detect paper warp or paper jam noise faster and stop the
scan, select [High].
z
To decrease the frequency of paper jam detection if paper jams
occur frequently in the feeder, select [Low].
z
This setting can also be configured in the operator panel. When
the operation panel setting is prioritized, the operator panel
setting is prioritized over the Software Operation Panel setting.