Fujitsu Ricoh Fujitsu fi-7280 Color Duplex Document Scanner - Manual (Page 25)

Appendix
Chapter 1 Scanner Overview
Glossary
Introduction
Index
Contents
TOP
25
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
This section explains how to power on/off the scanner. How to Turn the Power ON
1
Press the [Power] button on the operator panel.
The scanner is turned on, and the [Power] button lights in green.
During initialization, the following image is displayed on the LCD of
the operator panel.
The scanner is ready to scan when [Ready] is displayed.
1.3 Turning the Power ON/OFF
HINT
The method by which the scanner is powered on/off can be specified
from one of the following:
z Press the [Power] button on the operator panel
z Unplug the power cable then plug it back in
z Have the scanner turn on/off in sync with the computer's power
For details, refer to "Method of Turning the Scanner ON/OFF [Power
SW Control]" (page 203) .
Menu
Scan/Enter
Check
Power
Stop/Clear
[Power] Button