Appendix, Glossary introduction index contents top, Transport lock, cover open, and print errors – Fujitsu Ricoh Fujitsu fi-7280 Color Duplex Document Scanner User Manual
Page 132
Chapter 8 Troubleshooting
132
■
Transport lock, cover open, and print errors
Error codes beginning with the letter "U" are displayed.
J2:55
Multifeed detected
(Overlap)
Press the Scan button to
eject the document.
After ejecting the
document, multifeed
detection for the next
document can be
enabled/disabled from
the Menu button.
1 Press the [Scan/Enter] button on
the operator panel to eject the
documents.
2 Press the [Menu] button on the
operator panel, select whether or
not to detect multifeed, and then
press the [Scan/Enter] button or
perform a scan from the
computer.
Multifeed detected
(Overlap)
Press the Scan button to
eject the document.
Press the Menu button to
memorize the multifeed
pattern.
1 Press the [Scan/Enter] button on
the operator panel to eject the
documents.
2 Press the [Menu] button on the
operator panel, select whether or
not to memorize the pattern, and
then press the [Scan/Enter]
button or perform a scan from the
computer.
Multifeed detected
(Overlap)
Press the Scan button to
eject the document.
1 Press the [Scan/Enter] button on
the operator panel to eject the
documents.
2 Press the [Scan/Enter] button on
the operator panel or perform a
scan from the computer.
J2:56
Multifeed detected
(Length)
Press the Scan button to
eject the document.
1 Press the [Scan/Enter] button on
the operator panel to eject the
documents.
2 Press the [Scan/Enter] button on
the operator panel or perform a
scan from the computer.
Error
code
Error messages
Resolution
J8:01
Sensor(s) dirty
Clean the Pick Sensor.
Open the ADF and clean the eight
document sensors.
For details, refer to
J8:04
Sensor(s) dirty
Clean the READ-TOP
Sensor.
Error
code
Error messages
Resolution
U0:10
Transport lock
error
Unlock the
transport lock
switch.
(fi-7260/fi-7280)
Unlock the transport lock switch.
For details, refer to "Installing the
Scanner" in Getting Started.
U4:40
(*1)
ADF open
Close the ADF and reload the
documents.
U5:4A
(*2)
Imprinter Cover
Open
(only when
imprinter is
installed)
Close the print section of the imprinter,
and load the document again.
U6:B4
Print cartridge not
installed
Check if the Print
Cartridge is
mounted
correctly.
(only when
imprinter is
installed)
This error is related to the imprinter.
For details, refer to the fi-718PR
Imprinter Operator's Guide.
Error
code
Error messages
Resolution