Press the [Menu] button and confirm that the LCD
displays [Disable], and then either press the [Scan/Enter]
button or perform a scan from the computer.

From this point, note that the indication on the LCD switches between
[Enable] [Disable] every time you press the [Menu] button. When
[Disable] is displayed, the next document is scanned with paper
protection disabled. After that, the subsequent documents are
scanned according to the paper protection setting of either scanner
driver, Software Operation Panel, or operator panel.

HINT

If paper protection is set off frequently, refer to

"Paper protection is

set off frequently." (page 150)